Model 125EE Specs

Baud rate: 0 to 250 Kilobaud
Input circuit: EIA-485 receiver protected by two self resetting fuses 120 ohm input terminator protected by a self resetting fuse Four transorb diodes: two on +Data, two on -Data Input signal: 0.5 volts minimum, 12 volts maximum Input can withstand up to 120 volts without damage, transients up to 5KV
Output circuit: Slew rate limited EIA-485 driver protected by two self reseting Polyswitch fuses. One transorb diode on +Data, one on -Data. (Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables)
Output signal: EIA-485 driver yields an approximate 3 volt signal into 120 Ohms Outputs can withstand up to 12 volts without damage, transients up to 5KV.
Connectors: Gold plated 5 pin Neutrik D-1
Series Isolation: 2500 volt optical coupler, 5000 volt split bobbin transformer
Power input: 90 - 240 volts, 50/60 hertz, 0.1 amp (24 watts)IEC-320 (international) input connector
Color: Silver hammertone with black front and back panels
Size & weight: 11.25" deep, 1.74" high, 8.25" wide, 5 pounds (19" rack adapter available)
Wall Mount 2" deep, 8.5" high, 10.5" wide, 5 pounds
Mounting Hole Locations 6" Vertical 9.5" Horizontal