Tools for Stagecraft


Local Time:
1 2 3 Next 
  • Ultimate Ratcheting Focus Tool
    Ultimate Ratcheting Focus Tool
    Ultimate Ratcheting Focus Tool
    Average rating:
    $109.95
    Qty:
  • Ultimate Focus Tool
    Ultimate Focus Tool$84.95
    Here’s the newest focusing tool on the market. The maker says it’s the only tool you need while focusing. And it is a lot of tool packed into a small size. See the hex cutout? That’s actually three cutouts that fit all the nuts and bolts on a C-clamp as well as the ˝” hex bail on the side of the light. At the other end are slots to turn wing nuts and other square nuts. On one side is a continuity tester for checking lamps and on the other side is a built-in pin spreader for 20-60 amp pins.

    Qty:
  • Standard Focus Tool
    Standard Focus Tool$54.95
    This is a stripped down version of the Ultimate Focus Tool. Again, three cutouts fit all the nuts and bolts on a C-clamp as well as the ˝” hex bail on the side of the light. At the other end are slots to turn wing nuts and other square nuts. No continuity tester and no pin spreader.
    Qty:
  • Flat Focus Tool
    Flat Focus Tool$29.95
    Flat tool fits even the narrowest spaces. Cut out to fit numerous nut and bolt sizes.
    Qty:
  • Lanyard safely attaches tools to your belt
    Belt Clip Lanyard
    Belt Clip Lanyard
    Average rating:
    $19.95
    Qty:
  • Wing Nut Wrench also for Cheseboroughs
    Wing Nut Wrench
    Wing Nut Wrench
    Average rating:
    $29.95
    Qty:
  • Mongo wrench
    Mongo wrench$39.95
    It's a huge wrench, machined out of solid aluminum plate. The Mongo-Combo wrench will fasten everything a Mega-Combo Wrench can plus the Light Source Mega-Coupler Nuts and other coupler wing nuts. If that isn't enough, a bottle opener too!
    Qty:
  • Lightspeed wrench.  one of the original multi lighting wrenches.
    Lightspeed wrench$44.95
    (Formerly the TODD Lightspeed Wrench)

    Here's a wrench that's a favorite among film technicians because it was made to fit sister lugs, but the sizes make this a theatrical and television favorite as well.

    Three ratchet sizes -- 3/4", 1/2", 3/8" Angled handle prevents banged knuckles.
    Qty:
  • Lightspeed wrench with Lanyard Ring attached
    Lightspeed wrench with Lanyard Ring$49.95
    Now you can clip a lanyard to this unusually shaped wrench with this extremely tough marine-grade nylon lanyard ring attached.
    Qty:
  • Gator Grip Kit fits all nuts and bolts from 1/4 inch to 3/4 inch
    Gator Grip Kit$59.95
    Everything you need in the palm of your hand.

    Maybe you've seen the "Gator Grip" on TV and you wondered if it really works. I can tell you it does! This one socket fits all nuts and bolts from 1/4" to 3/4" and all metric sizes from 9mm to 17mm. And it fits odd shapes like wing nuts and eye bolts too.

    The trick of the Gator Grip is that the socket is made up of 52 spring loaded steel roller pins that automatically conform to the shape of the nut, bolt or whatever else you want to tighten.

    And here's the best part: I've combined it with a flexible stubby ratchet and a pouch so that you have an entire lightweight socket set that fits in the palm of your hand and you can carry it on your belt! It also comes with an adapter that lets you to use the socket with your electric screwgun. When I show the Gator Grip in person--everybody wants one. This is the coolest tool I've seen in a long time.
    Qty:
  • Large Gator Grip Socket Only requires 1/2 inch drive and fits all nuts and bolts up to 1 inch
    Gator Grip Socket Only, Large$39.95
    1/2" drive.
    Large socket fits nuts and bolts from 9/16" to 1 1/4".
    This socket requires a 1/2" drive (not included).
    Qty:
  • Gator Grip Universal Socket and Adapter turns all nuts, bolts, wingnuts, etc. up to 3/4 inch
    Gator Grip Universal Socket and Adapter
    Gator Grip Universal Socket and Adapter
    Average rating:
    $24.95
    Yes, you can buy the socket without the pouch or the flexible stubby ratchet.

    Fits nuts and bolts from 1/4" to 3/4" or 9mm to 17mm.
    Qty:
  • stubby flexible ratcheting wrench to use alone or with gator socket
    Flexible Stubby 3/8 inch Ratchet$24.95
    Same ratchet used in the Gator Grip Kit.
    Qty:
  • Mega Combo wrench is a small wrench that fits in your pants pocket for use in emergency
    Mega Combo wrench
    Mega Combo wrench
    Average rating:
    $7.95
    A measly 2 3/4" long and weighs practically nothing, this mini-wrench has cutouts for all the nuts and bolts on a C-clamp. It's even got a hole for a lanyard so you can wear it around your neck or on your key chain.

    Carry this and you'll never be caught without a wrench again!
    Usually shipped in black. Orders of special colors will incur a $20 additional handling charge.
    Qty:
  • Altman lighting wrench
    Altman wrench$12.95
    The absolute "MUST HAVE" wrench for every electrician working in the theatre. An industry standard.

    Cutouts in the body fit all the bolts on the C-clamp and lamp. The "star" fits the older version metal handles on lekos and par cans.

    When you go up to focus lamps, you better have this wrench with you.
    Qty:
  • Klein 6inch Wide Jaw Regular Dip Adjustable Wrench
    Klein 6 inch Wide Jaw, Regular Dip, Adjustable Wrench$33.95
    Special wide jaw opens to size of an 8" crescent.

    If you're going to carry just one wrench on stage, this is the wrench it should be. The perfect adjustable wrench for the stage.

    Small size of a 6" wrench with the capability of an 8" wrench. The extra wide jaw even fits Cheeseboroughs! No need to carry two wrenches. Plastic coated handle provides comfort and protects you from accidental shock.

    Made by Klein insures high quality. Each wrench is personally tested for smooth operation before it's shipped to you. You get only the best from TOOLS FOR STAGECRAFT.
    Qty:
  • Klein 8inch Wide Jaw, Regular Dip Adjustable Wrench
    Klein 8 inch Wide Jaw, Regular Dip, Adjustable Wrench$34.95
    This is a larger version of the 6" Klein Wide Jaw Wrench. Jaw opens to size of a 10" crescent.

    Why carry an 8" crescent that opens to a 10" size? How many times have you needed to change the bottle on an air lift and the nut was stuck? How long did it take you before someone "found" a wrench that was big enough to handle the nut? Be prepared with a 8" Wide Jaw Klein. Carrying an 8" wrench in your tool bag is lighter than carrying a 10" wrench.

    The handle is coated with same plastic coating as the regular dip 6" Klein Wide Jaw wrench.

    Made by Klein insures high quality. Each wrench is personally tested for smooth operation before it's shipped to you. You get only the best from TOOLS FOR STAGECRAFT.
    Qty:
  • coffin key aka roto lock
    Coffin Key - Hex 5/16 inch$14.95
    5/16" Hand held T-handle wrench for Roto-Locks. Only 6" long.
    Qty:
  • GAM Chek for 20amp stage use
    GAM Chek
    Three-in-One electrical tester with built-in plug and socket. Tests lamp continuity with a ringer and a light. Tests cable continuity on each of three lines independently eliminating crossed wire problems. Tests for power and crossed lines. Neon lights require approximately 55% power before they will light so false readings from cross-over or minimal voltage are reduced.

    Comes only in the RED 20 amp Stage Pin configuration. All other configurations have been discontinued.
    Qty:
  • Wavetek DM73B Digital Multimeter
    Wavetek DM73B Digital Multimeter$89.95
    Small, lightweight, probe-type, digital multimeter. Redesigned for 2002, but still that great little meter we all love. So light you can carry this meter all day. Be ready to troubleshoot those annoying electrical problems. Digital readout insures accuracy.

    Measures both AC/DC voltage, resistance and continuity. An internal ringer signals if your continuity is "good." Every stage electrician should have this meter. Call for suggestions for a terrific belt pouch for this meter.
    Qty:
  • Battery powered Weller soldering iron
    Soldering Iron, Weller, battery powered$29.95
    Economy Model. Cordless. battery powered.

    Heats up to 850 degrees F. or the same as a 60 watt electrical unit. Heat setting is adjustable.
    Qty:
  • Rotary Gel Cutter Blade
    Rotary Gel Cutter Blade$8.95
    Qty:
  • Leatherman Wave is the most popular Leaterman multipliers
    Leatherman Wave$94.95
    Leatherman Wave (third generation) now comes with larger and stronger blades. The new sleek Wave answers many of the needs of those using multipliers. Four blades--a serrated knife, a plain edge knife, a saw and a dual sided file (one steel and one diamond) can be opened without ever opening the tool. Rounded edges make the tool extremely comfortable to use. Includes a scissor, four sizes of slotted screwdrivers, a phillilps screwdriver and more. Comes with nylon case. Leather case on special order.
    Qty:
  • Gerber Legend multiplier is a larger alternative to the Gerber 600 series multiplier
    Qty:
  • Leatherman Charge TI is one of the largest multipliers
    Leatherman Charge TI$179.95
    The strength and lightness of Titanium make the Charge Ti a hot new multiplier. Just as in the 3rd gen. Wave, the Charge Ti’s jaws withstand 133% more squeezing load, the wire cutter blade is 58% larger, locks are 50% stronger, and the knife blades are super-sized. This is the only Leatherman with blades of 154 CM steel. That means your blades are going to hold an edge three times longer! Bronze bushings make the blades smooth and quick to open.

    Tools include needle nose and regular pliers, wire cutters, 154 CM plain blade knife, serrated knife, saw, scissors, wood/metal file, diamond file, large and small bit driver, large screwdriver, 8 double-ended bits, ruler, bottle/can opener, fixed and quick-release lanyard ring and removable pocket clip.
    Qty:
  • Leatherman Surge replaces the Leaterman 200
    Leatherman Surge$79.95
    This is like a “Super Wave” includes the new features of the Core above. A unique blade exchanger comes with saw and diamond/wood file blades. Large and small bit drivers include double-ended bits. And 4 outside-opening blades give you quick access to the tools you use most. All these new features plus Leatherman’s strongest scissors yet.

    Tools include: Needlenose Pliers, Regular Pliers, Wire Cutters, Hard-Wire Cutters, Stranded-Wire Cutters, Electrical Crimper, Clip-Point Knife, Serrated Knife, Scissors, Blade Exchanger, Diamond and Wood/Metal File Blade, Saw Blade, Large Bit Driver, Small Bit Driver, Phillips #1-2 and Screwdriver 3/16” Bit, Phillips and Flat Tip Eyeglasses Screwdriver Bit, 5/16” Screwdriver, Awl w/Thread Loop, Ruler (9 inches/22 cm), Bottle/Can Opener, Wire Stripper, Lanyard Ring.
    Qty:
  • Gerber Radius multiplier
    Gerber Radius$40.00
    Here's a very ergonomic multiplier. 4 7/8" closed, it has oversize rubberized grips and larger sized tools too. Blades deploy from the sides using Gerber's opening assist system. Features needlenose pliers with wire cutters, cross-point srewdriver, flat head screwdriver, standard edge blade, scissors, bottle opener and wire stripper. Tools lock for safety. Includes black nylon belt sheath.
    Qty:
  • Leatherman Crunch is a vice grips and multiplier all in one
    Leatherman Crunch$105.00
    With the Leatherman Crunch you can carry a heavy duty blunt jaw locking vice-Grip that's no larger than the standard multiplier. Additional tools are locking Pliers, Wire Cutters, Hard-Wire Cutters, Serrated Knife, Metal/Wood File, Ruler (Inch/Metric), Bottle Opener, Small Screwdriver, Medium Screwdriver, Large Screwdriver, Phillips Screwdriver (#1/#2), Hex Bit Driver, Wire Stripper, and Lanyard Attachment.
    Qty:
  • Leatherman Core is similar to the original leatherman multiplier
    Leatherman Core$84.95
    Leatherman’s latest 4.5” stainless steel tool has the strongest pliers Leatherman makes, all locking and longer blades, and easy-to-use locks. Core is the first Leatherman to feature hollow-ground screwdrivers. Comfortable handles are rounded to give you a firm grip.Tools include: Hard-Wire Cutters,Stranded-Wire Cutters, Electrical Crimper, Clip-Point Knife, Serrated Knife, Wood/Metal File, Saw, 5/16” Screwdriver, 7/32” Screwdriver, 1/8” Screwdriver , Phillips Screwdriver, Awl w/Thread Loop, Ruler (9 inches/22 cm), Bottle/Can Opener, Wire Stripper, Lanyard Ring. Nylon sheath.
    Qty:
  • Gerber Compact Sport Multiplier is a smaller version of the popular 600 series Gerber Multiplier
    Qty:
1 2 3 Next