Lightweight. Foam padding. Multi-system capability.
Works on most common intercom systems.
WE ARE NEAR THE END OF AVAILABLE STOCK.
We only have 1 with the clearcom 4PF plug attached.
Comes equipped with a mini pin connector which connects to one of three different adapters for use with 4 & 5 pin RTS systems, Clear Com, and new Vega systems. Do you work with different systems from day to day? Just change the adapter!
Adapters sold separately. Headset does not come with an adapter. You will need at least one.
Pocket XLR Cable Testers$89.95
Two piece kit includes a sender and receiver. Cable testers provide a quick check of XLR cables -- even when cable ends are in a different locations.
Works on either phantom power from the board or power supplied by the sender unit. Attach sender and receiver to opposite ends of the cable or use the receiver alone if phantom power is present. Shows if the cable is good or bad via 3 two-color green and red LEDs.
Battery powered. It's only ON when in use. Long battery life. 5/8” diameter by 3” and 5”
These adapters are made to connect our headsets to your intercom system. Mini pin connector attaches to the headset and the common plug connects to your belt pack.
WE ARE NEAR THE END OF OUR AVAILABLE STOCK.
Specify the number of pins and gender of the plugs you are ordering.
4 Pin Male -- for RTS systems (1 in stock)
5 Pin Male -- for RTS systems (5 in stock)
4 Pin Female -- for Clear Com (out of stock)
We can provide you on request with the pinout diagrams of the 4 Pin Female and the mini XLR if you choose to make your own adapter
These adapters are for headsets you currently own with the mini pin adapter OR with our currently available lightweight headsets. They are not available with either of the Telex headsets.