This is the newest wrench on the lighting scene. It's a multi-functional wrench that solves all your wrench needs when focusing lamps. First it's a wrench that fits all the nuts and bolts on the c-clamp and lamp, it even fits wingnuts. And its a continuity tester too so if you need to check the lamp to see that it's good, the tool is right there in your hand. And it has a third tool too. A pin spreader is built into the wrench as well. There's a lanyard ring attachment hole too. This may be the best tool invented for focusing yet.
 

#22190  Ultimate Focus Tool  $94.95
Quantity:

Looking for a smaller version of the ultimate focus tool? It's a wrench that fits all the nuts and bolts on the c-clamp and lamp and fits wingnuts too. A lanyard ring attachment hole is built in.
 

#22200  Standard Focus Tool  $44.95
Quantity:

Now you can clip a lanyard to this unusually shaped wrench with this extremely tough marine-grade nylon lanyard ring attached.
 

#22031  Lightspeed Wrench with Lanyard Ring  $45.95
Quantity:

Here's a great wrench for all you lighting technicians. It's a five-way ratcheting speed wrench that fits all the nuts and bolts on a typical C-clamp. Two case hardened sockets are permanently attached at one end and each socket fits two different sizes!  There's a square cutout in the bottom of each socket that fits the square stud bolt and the set screw.  The larger 12 point outer sockets fit the lamp yoke and any other 9/16" bolt.  On the other end of the wrench is a 6 point ratcheting box wrench that fits the bail at the side of the lamp. It's a great wrench and if you want to carry it in a pouch, choose the CO40A pouch.

 

#22040  341 Putz Wrench  $79.95
Quantity:

If you're going to carry just one wrench on stage, this is the wrench it should be. The perfect adjustable wrench for the stage.

Small size of a 6" wrench with the capability of an 8" wrench. Extra wide jaw fits Cheeseboroughs!  No need to carry two wrenches.  Plastic coated handle.

Made by Klein insures high quality. Each wrench is personally tested for smooth operation before it's shipped to you. You get only the best from TOOLS FOR STAGECRAFT.

 

#22160 250 6" Wide Jaw Klein Reg. Dip  $21.95
Quantity:

Don't drop your wrench! There's nothing more embarrassing (and potentially injury causing) than dropping your wrench on someone while you're working high. 

Attach your wrench to the lanyard and clip it to your belt.  This is a very handy heavy-duty stretchable safety.  The very strong 16"long coil made from .187" thick plastic easily stretches to arms length and then coils back up out of your way when not in use.  It will stand up to the abuse of any stagehands work.

Comes in various colors.  You may request the color of your choice and we will attempt to fill your order with your choices but depending on stock availability we cannot make a color choice guarantee.  Your color request should be placed in the "special instructions" box on your order.  The colors from left to right are see-thru blue, red, purple, clear, green, rootbeer and solid neon orange and black.

#22140  69 Belt Clip Lanyard  $19.95
Quantity:

Same wrench as the 6" Klein Wide Jaw. 
The difference is that the handle is "heavy dipped" with a thicker, more solid plastic coating.

If you're going to carry just one wrench on stage, this is the wrench it should be. The perfect adjustable wrench for the stage.

Small size of a 6" wrench with the capability of an 8" wrench. Extra wide jaw fits Cheeseboroughs!  No need to carry two wrenches.  Plastic coated handle.

Made by Klein insures high quality. Each wrench is personally tested for smooth operation before it's shipped to you. You get only the best from TOOLS FOR STAGECRAFT. 

 

#22150 251 6" Wide Jaw Klein Heavy Dip  $24.95
Quantity:

Combo 8" Box Crescent with 3/8" Ratchet
Brand new! Another version of a popular wrench we used to carry that's often been requested since it was discontinued. Now it's back in a brand new form.

It's a combination of the equivalent of an 8" crescent wrench and a 3/8" ratchet wrench. The boxed crescent wrench fits nuts and bolts from a ¼" square (set screw on a C clamp) to a 7/8" hex (yoke bolt on a C clamp). It's a very handy all-purpose wrench and weighs less than our original. It's a good thing not to carry any more weight than you have to.

Maybe you've seen the "Gator Grip" on TV and you wondered if it really did all they claimed. I can tell you it does!  This one socket fits all nuts and bolts from 1/4" to 3/4" and all metric sizes from 9mm to 17mm.  And it fits odd shapes like wing nuts and eye bolts too.  The trick of the Gator Grip is that the socket is made up of 52 spring loaded steel roller pins that automatically conform to the shape of the nut, bolt or whatever you want to tighten. 

And here's the best part:  I've combined it with a flexible stubby ratchet and a belt pouch so that you have an entire lightweight socket set that fits in the palm of your hand and you can carry it on your belt.  It also comes with an adapter that lets you to use the socket with your electric screwdriver.  When I show the Gator Grip in person--everybody wants one. This is the coolest new tool I've seen in a long time.
 

#69505  Gator Grip Kit  $59.95
Quantity:

#22075 Wing Nut Wrench  $24.95
Quantity:

Huge wrench, machined out of solid aluminum plate. The Mongo-Combo wrench will fasten everything a Mega-Combo Wrench can plus the Mega-Coupler Nut, other coupler wing nuts, and if that isn't enough… a bottle opener!
 

#22180 340 956 Mongo Wrench  $39.95
Quantity:

A measly 2 3/4" long and weighs practically nothing, this mini-wrench has cutouts for all the nuts and bolts on a C-clamp. It's even got a hole for a lanyard so you can even wear it around your neck as a lucky ankh.  Never be caught without a wrench again!
 

#22080 340 956 Mega Combo Wrench  $7.95
Quantity:

Klein Allen wrench always fits perfectly inside the hole of a sister lug.

22100 329  Allen Wrench T-Handle   $19.95
Quantity:

Here's a ratchet wrench that will fit the set screw on C-clamps no matter which size bolt head you encounter..
Square box fits 1/4" and 3/8" studs.

 

#22110  Klein Ratcheting Box Wrench  $29.95
Quantity:

The absolute "MUST HAVE" wrench for every electrician working in the theatre.

Cutouts in the body fit all the bolts on the C-clamp and lamp. The "star" fits the older version metal handles on lekos and par cans.

When you go up to focus lamps, you better have this wrench with you! 

 

#22070  249 Altman Wrench  $12.95
Quantity:

#22155  Ergonomic Wide Jaw 6 inch Wrench  $16.95
Quantity:

This is a larger version of the 6" Klein Wide Jaw Wrench.

Why carry an 8" crescent that opens to a 10" size? 
How many times have you needed to change the bottle on an air lift and the nut was stuck? How long did it take you before someone "found" a wrench that was big enough to handle the nut? Be prepared with a 8" Wide Jaw Klein. 
Carrying an 8" wrench in your tool bag is lighter than carrying a 10" wrench.

The handle is coated with same plastic coating as the standard 6" Klein Wide Jaw wrench.

Made by Klein insures high quality. Each wrench is personally tested for smooth operation before it's shipped to you. You get only the best from TOOLS FOR STAGECRAFT.

 

#22170 252 8" Wide Jaw Klein Regular Dip  $29.95
Quantity: